10 Best Hi Speed Usb Isolator Recommended By An Expert

Features :

• Supports 1.1, 2.0, 3.0, 3.1 USB ports and Supports Low (1.5Mbps), Full (12Mbps) and Hi-speed (480Mbps) mode by automatic detection
• Supports audio and other devices including high resolution 384kHz and DSD DACs, USB midi devices, USB mixers, USB microphones
• Provides 400mA to the connected USB device (or 500mA if your computer’s USB port can supply <600mA to the isolator). 400mA is sufficient for most devices.
• Works with Thunderbolt ports on the computer, BUT NOT with (audio) devices that requires Thunderbolt connection
• No driver required, no settings to configure, Self powered, no external power needed, Size: 55x35mm + cable 10cm

Features :

• No external power supply required, up to 500mA current on isolated side. External power can be connected to supply up to 2000mA current on isolated side
• Galvanic isolation to the USB bus, supports SuperSpeed 5Gbps, hi-speed 480Mbps, full speed 12Mbps and Low speed 12Mbps
• 5kVrms signal and power isolation, Advanced ESD protection (20kV)
• Ultra-quiet power rail isolation for less noise in highly sensitive applications (LT3045)
• Works out of the box, no drivers needed

Features :

• No external power supply required. External power can be connected to supply up to 2000mA
• Galvanic isolation to the USB bus, supports SuperSpeed 5Gbps, hi-speed 480Mbps, full speed 12Mbps and Low speed 12Mbps
• 1kVrms signal and power isolation, Advanced ESD protection (20kV)
• Ultra-quiet power rail isolation for less noise in highly sensitive applications (< 1 µV RMS @ 22 kHz BW)
• Works out of the box, no drivers needed

Features :

• New: auxiliary power input The secondary side may be powered by an external power feed with up to 2000mA for energy-hungry devices via Micro-USB. The power switching between internal and external supply is done automatically.
• Provides galvanic isolation to the USB bus
• Compliant to USB 2.0 Hi-Speed (480 MBit/s)
• Isolation withstands 5kVrms, Advanced ESD protection (20kV)
• Works out of the box, no drivers needed

Features :

• True High speed USB2.0 isolation technology without time delay Max Speed Up to 480Mbps with 0.96 Inch Display;
• Support high-speed, full-speed, low-speed devices Max Speed Up to 480Mbps;
• 1 Turn 3 Ports isolator works with a variety of usb device such as audio equipment,usb cameras,printer,u disk,etc…
• Compatible with windows,mac os,inux,android,pc,arm boards
• ESD protection for both input port and the output port ;TVS Protection for Both Input And Output;Switch-level up to 10us Short-Circuit for output Protection;

Features :

• Leading innovation – Previous isolators were limited to Full Speed (12 MBit/s) and Low Speed (1.5 MBit/s) transmission. This product is capable of transmitting USB Hi-Speed (480 MBit/s) while providing full galvanic isolation of both the data and the power lines.
• USB2.0 High Speed – HS01 supports USB2.0 High Speed transmission, which is compatible with high-resolution audio transmission such as PCM32bit/768kHz and DSD512 Native. Note1: It may affect the USB automatic On/Off function of some products. Note2: Only supports USB2.0 High Speed audio devices, does not support USB1.0, USB1.1, keyboard and mouse, etc.
• Low latency – The latency is only 0.29us, which fully meets hifi and professional applications’ needs. Note: Generally, the latency of USB device is about 5000us-20000us(5ms-20ms).
• Galvanic Isolation – This product is an ideal solution to break ground loops, avoid noise coupling and protect ports from power surges and voltage spikes in applications which require high speed USB transfers. The galvanic isolation barrier withstands potential difference up to 1000VRMS. There is no capacitive coupling.Effectively eliminate the noise introduced by the ground loop，the noise can be reduced by up to 50dB in real world measurement.
• Precautions – When the device connected to HS01 exceeds the current output capability, an external auxiliary power supply can be used. Please note that it’s recommended to use power supplies isolated from the earth ground like a modern phone charger. Linear power supplies and other earthed power supplies are not recommended.Note: Connecting the auxiliary power input to the same PC being isolated will defeat the isolation property of HS01.

Features :

• DSD TECH: DSD TECH focuses on the development of communication connection devices such as USB/Serial/Wireless. We have served more than 100,000 customers in Europe, North America and Japan.
• USB 2.0 High Speed Isolator: The SH-G01B is a USB isolator compatible with USB 2.0 high speed, full speed and low speed applications. It provides power and signal isolation to prevent electrical interference, static breakdown and signal fluctuation. It is suitable for industrial automation, medical equipment, financial transactions, HiFi audio noise cancellation.
• ADI ADUM3165 Industrial Grade Chip: The ADI ADUM3165 chip provides professional-grade isolation performance and reliable data transmission. With precise signal redriving and high-speed data retiming, interference, jitter and signal distortion can be eliminated for high-speed, stable USB connectivity.
• High-speed transmission: The SH-G01B USB isolator has wide compatibility and a transmission speed of up to 480Mbps, which meets the needs of most users for fast data transmission. When transferring large files, real-time data transfer or large-capacity file backup, it can bring convenient operation experience and stable and efficient data transfer capabilities.
• Warranty: DSD TECH provide a 1 year warranty and lifetime technical support for this Hi-Speed USB Isolator.if you have any questions, please feel free to contact us. We will respond within 24 hours.

Features :

• Remove ground loops, protect PC, eliminate humming noise
• Signal isolation up to 2.5KV, power isolation up to 1.6KV
• Supports USB 2.0 Full/Low Speed, ⚠ USB 2.0 High Speed Devices are not supported ⚠
• Up to 1W load capacity, ⚠ not for charging or devices drawing over 180mA
• Uses ADUM3160 IC for signal and B0505S for power isolation
• This has no magic. Isolator will only remove hum caused by the ground loops. It will not remove noise coming from your antenna or from power source.

Features :

• Improve common-mode voltage, enhance noise rejection, and permit two circuits to operate at different voltage levels
• Protection against harmful noise, ground loops, surges, and spikes
• Works with any 1.5Mbps (low speed) or 12Mbps (full speed) USB device
• Has its own isolated 5V power supply that can supply 100mA

Features :

• 【Only USB1.0/USB 1.1/USB2.0 Full-Speed compatible】Please Note: USB 2.0 High Speed Devices are Not Supported
• 【Power Isolator Inside 】1W MAX. Low and full speed data rate: 1.5 Mbps and 12 Mbps
• 【Application】USB debugging device/A variety of industrial USB devices/Noise sensitive areas.
• 【Advantage】Combining high speed CMOS and monolithic air core transformer technology, this isolation component provides outstanding performance characteristics and is easily integrated with low and full speed USB-compatible peripheral devices.
• 【Package Includes】1x USB Isolator (Please Note:USB 2.0 High Speed Devices are Not Supported, Please Confirm Your Device Carefully and Then Purchase.THANK YOU!)